SP200 Maintenance Free Underwater Light Cartridge®

• Cartridge replaceable underwater using Aqua Phaross GENUINE underwater mateable connection system with gold plated contacts

• Luminaire cartridge held in position within Niché/ Bezel by a single self locating tamper proof screw

• Twin 12V 50W Axial Halogen Lamps & customised optical system provide outstanding levels of focused underwater illumination

• Technical Data: Colour Temp- 3000K, 1200lm, 4000hr Manufacturers rated life, Rendering Index- 1A

• Bright Anodised Aluminium Reflector with lamps held in their optimum position for use with Impact resistant optical grade polycarbonate lens with Fresnel Prisms

• Luminaire manufactured in Scotland (United Kingdom) in accordance with BS EN 60598-1 : 1993 Part 1 & BS EN60598-2-18 : 1994 (Luminaires for swimming pools & similar applications)

• Replacement Cartridges: Purchase new SP200 Cartridge from Aqua Pharos (part no: API/SP200-1)

• These units must be operated at a maximum 12V
   

FITTING:

• Isolate power to the luminaire.

• Remove the retaining screw and carefully withdraw the luminaire from the niche/ bezel.

• Separate the two sections of the underwater mateable connector by pulling gently on the female cable and the light cartridge.

• Remove used cartridge from swimming pool & replace with a new cartridge.

• Reconnect the female power cable to the light fitting, ensuring the connectors are fully home.

• Position the light cartridge in the bezel/ niche ensuring the power cable is not trapped between the niche and luminaire.

• Insert the self-locating retaining screw and tighten until the luminaire sits snugly against the bezel.
  DO NOT OVER TIGHTEN.

• Lights must not be switched on until fully submerged.

• Failed Cartridge can now be discarded or returned to Aqua Pharos for recycling.