top of page
SP200FF Flush Fitting Underwater Light Cartridge®
  • Cartridge replaceable underwater using Aqua Phaross GENUINE underwater mateable connection system with gold plated contacts
  • Luminaire cartridge held in position within Niché by 2 x M6 A/Head Screws
  • Twin 12V 50W Axial Halogen Lamps & customised optical system provide outstanding levels of focused underwater illuminationTechnical Data: Colour Temp- 3000K, 1200lm, 4000hr Manufacturers rated life, Rendering Index- 1A
  • Bright Anodised Aluminium Reflector with lamps held in their optimum position for use with Impact resistant optical grade polycarbonate lens
  • Luminaire manufactured in accordance with BS EN 60598-1 : 1993 Part 1 & BS EN60598-2-18 : 1994 (Luminaires for swimming pools & similar applications)
  • Replacement Cartridges:
              Purchase new SP200FF
              Cartridge from Aqua Pharos (part no: API/SP200-1FF)
              These units must be operated at a maximum of 12V
  • Isolate power to the luminaire.
  • Remove the retaining screws and carefully withdraw the luminaire from the niche.
  • Separate the two sections of the underwater mateable connector by pulling gently on the female cable and the light cartridge.
  • Remove used cartridge from swimming pool and replace with a new cartridge.
  • Reconnect the female power cable to the light cartridge, ensuring the connectors are fully home.
  • Position the light cartridge in niche ensuring the power cable is not trapped between the niche and luminaire.
  • Insert the 2 x M6 self-locating retaining screws and tighten until the luminaire sits snugly against the niche. DO NOT OVER TIGHTEN.
  • Lights must not be switched on until fully submerged.
  • Failed Cartridge can now be discarded or returned to Aqua Pharos for recycling.
bottom of page