top of page
SP200 Stella Lunaris Maintenance Free Underwater LED Cartridge®
-
72 High Powered LED's
-
Customised Optical system provideoutstanding levels of focused illumination• LED Lumen Output approx 1430 Lm
-
Extremely low power consumption using only 15.4W a massive 95% less power than a PAR56 and more than 85% less than 100W Halogen
-
Operarted using ZP3815 Stella Lunaris LED Driver 700mA 30VDC MAX (in compliance with BS EN 60598-1 : 1993 Part 1 & BS EN 60598-2-18 : 1994 Luminaires for swimming pools & similar applications)
-
Cartridges are direct replacements for existing SP200 or Installations (utilising the existing female cable with wet mateable connector)
-
Cartridges replaceable underwater using Aqua Pharos's GENUINE underwater mateable connection system with gold plated contacts
-
1 Year Warranty – Life expectancy 50,000 hrs
-
IPX8 20m – Impact Tested 7Nm (10 x the required standard)
FITTING
-
Isolate power to the luminaire.
-
Remove the retaining screw and carefully withdraw the luminaire from the niche/ bezel.• Separate the two sections of the underwater mateable connector by pulling gently on the female cable and the light cartridge.
-
Remove used cartridge from swimming pool & replace with a new cartridge.
-
Reconnect the female power cable to the light fitting, ensuring the connectors are fully home.
-
Position the light cartridge in the bezel/ niche ensuring the power cable is not trapped between the niche and luminaire.
-
Insert the self-locating retaining screw and tighten until the luminaire sits snugly against the bezel.
DO NOT OVER TIGHTEN. -
Lights must not be switched on until fully submerged.* Failed Cartridge can now be discarded or returned to Aqua Pharos for recycling.
bottom of page